Tools Required For Installation

1) Drill and assorted drill bits

2) Thread seal tape or equivalent sealant

3) Open-end wrench assortment (9mm, 11mm, 12mm, 13mm, 14mm, 16mm, 17mm, 22mm)

4) Large, adjustable crescent wrench

5) Cutting, crimping and wire-stripping pliers

6) Electric cut-off wheels

7) Sharp knife

8) Hammer and center punch

9) Voltmeter or test pen

10) Necessary fittings to make return hose connection to engine

11) 3/16’’ I.D. high pressure hose

12) 3/ 4’’ I.D. return hose

13) New full-flow OEM filter

14) New lubrication oil (Recommended By Manufacturer)